Helmet Demi Jet CGM 109S Shiny Matt Fluo Fuchsia (shaped visor)
Article information
Extremely compact and lightweight. The 109 helmets differ from the classic spherical helmets through the rear recess of the shell, where the vents are placed. The 109S is produced with a black base in matt black with a modern decal in fluo colours.
Polycarbonate shell
A polycarbonate outer shell is relatively cheap to produce, which makes the helmets affordable. The helmet is produced by using a mould where the material is poured and compressed. By using plasticizers, the plastic becomes elastic. Through exposure to UV-light and various weather conditions, these plasticisers deteriorate. This means that a polycarbonate helmet should be replaced after approximately 5 years.
Perimetrical rim
The outer shell is finished with a plastic rim. This not only provides a neat finish but also offers protection to the outer shell. If the helmet is dropped on the ground, it is not immediately damaged.
Micrometric buckle
The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.
Helmet graphics with scratch resistant varnish
Each helmet is carefully treated to achieve the right finish. After the helmet has been smoothed, it is sprayed in several layers of colour. Then the helmet is covered with water-based graphics. Finally, the helmet is covered with a transparent scratch-resistant lacquer.
Anti-theft ring
The chin strap of the helmet is equipped with a metal ring. By using this ring, the helmet can be attached to the hook under the saddle. In this way, theft is prevented.
Removable collar part
The helmet is equipped with an additional collar that is attached to the inner shell with a zip or velcro. The collar provides extra comfort and protection against the cold in the winter. If the collar is no longer used, it can easily be removed.
Goggles fixation
On the back of the helmet, there is a leather strap with a press stud. The elastic of the helmet goggles can be threaded through here. In this way, the elastic strap stays on the helmet while riding.
Shaped visor with anti-scratch coating
The visor is shaped to be in line with the nose. The visor is treated with a special coating that prevents scratching of the visor. However, do not let sharp objects such as keys or jewellery touch the visor.
Sizes XS-S-M-L-XL
The size of the helmet is determined by the number of centimeters of head circumference. The size is measured with a measuring tape above the ears along the widest part of the head. The number of centimeters determines the size. The sizes are however an indication. This is no guarantee that the helmet will fit. Check per brand how the size is calculated.Click here to determine your helmet size.
Rear air system
This helmet is equipped with rear air extractors. The air circle is generated by exploiting the movement, which creates a negative pressure and pushes the hot air inside towards the back of the helmet from where it comes out through the rear air extractors. In this way, the pilot benefits from a constant recycling of air inside the helmet, which always guarantees a temperature.
ECE 22-05 certification
If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.Specifications
| Size | : | XL / 61-62cm |
| Type | : | Demi Jet |
| Color | : | Purple |
Fits
Helmet Demi Jet CGM 109S Shiny Matt Fluo Fuchsia (shaped visor) fits the following vehicles:Recommended products
Spare parts
