Helmet Demi Jet CGM 107X FLORENCE TECH fluo yellow/black (long visor)
Article information
DEMI JET CGM 107X FLORENCE TECH
Demi Jet helmets generally come with a long visor or a molded visor with anti-scratch treatment. Demi Jet helmets have an anti-theft metal ring on the chinstrap which is very useful to attach the Demi Jet helmet to the hook under the scooter seat in a practical and safe way. This Demi Jet 107X Florence Tech neon yellow/black helmet with long visor also features front vents.
Features:
The 107 is the reference model of the CGM brand, it is quite opaque and enveloping, but at the same time extremely compact and light. Ergonomic and comfortable helmet, made in two shell sizes in thermoplastic material for a fit and very good adjustment comfort for all sizes. The Air Stream system with central ventilation and rear ventilation is completed by a perforated inner lining enriched with metal nets for the passage of air. The long visor has a slanted top edge that covers the front seal and provides a better grip.
Information:
Version with long visor.
Polycarbonate shell
A polycarbonate outer shell is relatively cheap to produce, which makes the helmets affordable. The helmet is produced by using a mould where the material is poured and compressed. By using plasticizers, the plastic becomes elastic. Through exposure to UV-light and various weather conditions, these plasticisers deteriorate. This means that a polycarbonate helmet should be replaced after approximately 5 years.
Front and/or rear ventilation system
The ventilation system consists of air inlets at the front and/or rear. Through air channels in the inner shell, the incoming air is guided through the helmet. In this way, the rider experiences a constant air flow which also guarantees a pleasant temperature inside the helmet.
Long Visor with anti-scratch treatment
The visor can be damaged during use. The small scratches can reduce visibility on sunny days. The anti-scratch coating makes the visor less prone to damage. However, do not let sharp objects such as jewellery or keys come into contact with the visor. Because of the coating, the visor should only be cleaned with water and dish soap. Use of strong detergents can damage the coating.
Luxury inner lining
The inner lining is more luxurious compared to the standard lining. The lining is made of refined materials and has a luxurious look. The colours of the lining match the exterior of the helmet. The luxury lining can often be found on the more expensive helmets.
Removable inner lining
The inner lining is attached to the inner shell by snaps or velcro. The removable inner lining can be washed with neutral soap. In this way, the lining remains in good quality and the helmet fresh. In addition to the inner lining, the cheek pads are also removable.
Perforated inner lining
The ventilation system in the helmet ensures a constant air flow. Through the perforated inner lining, this air, which enters through the air channels, can also reach the skin. This way it always stays cool inside the helmet. In winter, the ventilation system can be closed so no air enters the helmet.
Extra soft inner lining
By using softer materials compared to the standard lining, the helmet provides even more comfort. During a long ride, the soft lining is absolutely noticeable.
Micrometric buckle
The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.
Helmet graphics with scratch resistant varnish
Each helmet is carefully treated to achieve the right finish. After the helmet has been smoothed, it is sprayed in several layers of colour. Then the helmet is covered with water-based graphics. Finally, the helmet is covered with a transparent scratch-resistant lacquer.
Anti-theft ring
The chin strap of the helmet is equipped with a metal ring. By using this ring, the helmet can be attached to the hook under the saddle. In this way, theft is prevented.
Average weight size M +/-760gr
The weight of the helmet depends on the type of helmet. A jet-helmet is generally lighter than a system helmet. Glass fibre is also lighter than polycarbonate. The helmet is often measured in size M without visor. The second number on the sticker at the back of the helmet indicates the weight of the visor.
Different shell sizes
By using different helmet shells the helmets get an even better fit. The smaller helmet shells are used for the smaller sizes and the larger helmet shells for the larger sizes. In this way, size XS has a smaller helmet shell than size XXL.
Sizes XXS-XS-S-M-L-XL-XXL
Click here to determine your helmet size.
ECE 22-05 certification
If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.Specifications
| Size | : | XXS / 51-52cm |
| Type | : | Demi Jet |
| Color | : | Yellow |
Fits
Helmet Demi Jet CGM 107X FLORENCE TECH fluo yellow/black (long visor) fits the following vehicles:Documentation
User manual (Multiple languages):
Manual_Instruction_Multil...
Manual_Instruction_Multil...
Additional products
Recommended products
Spare parts
