Grease MALOSSI 7.1 MHR
Article information
MALOSSI 7.1 MHR GREASE
Semi-synthetic high performance grease with a lithium complex soap thickener.
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C.
Description:
MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half pulley bushing resulting in extended maintenance intervals.
MALOSSI 7.1 MHR GREASE is a high performance grease which combines mineral and synthetic oils, lithium complex soap thickener and anti-corrosion, anti-rust, anti-wear, and E.P. additives. The chemical composition of this grease produces superior anti-corrosion and thermal/mechanical stress resistant properties, even at extreme operating conditions.
Specifications and Approvals:
Meets or exceeds the following industry specifications :
ISO 6743-9 L-XCCEB 2/1
DIN 51502 KP 2/1 P –30
Features and Benefits:
Excellent protection against rust and corrosion and resistance to water wash out.
Elevated dropping point.
Excellent pumpability.
Extended lubrication intervals translating into reduced operational costs.
Compelling anti-corrosive characteristics of lubricated parts.
Specifications
Part number Malossi | : | 7615375B |
Part | : | Grease |
Fits
Grease MALOSSI 7.1 MHR fits the following vehicles:Return of packaging material
We are legally obliged to take back the following packaging materials from end consumers and in particular from private households free of charge:
- Transport packaging (packaging which facilitates the handling and transport of goods in such a way to avoid their direct contact and damage during transport, and which is not typically intended for transfer to the final consumer - such as pallets, foils, cardboard boxes for groupage etc.)
- Sales and secondary packaging which, after use, does not typically result in waste from private end-users (especially bulk packaging)
- sales and secondary packaging for which a systematic disposal is not possible due to pollutant and/or health risks during recycling; and
- Sales packaging of hazardous products (plant protection products, oils, liquid fuels and other oil-borne products and mixtures of diphenylmethane-4-4,-diisocyanate)
We will also take back packaging material collected during delivery of the products free of charge.
Because this packaging material cannot be involved in a dual disposal system, we ensure the return of the material to an orderly recycling cycle by taking it back.
Final consumers may hand over the packaging material resulting from the delivery to the delivering company at the actual place of delivery.