Malossi HTRoll, high precision calibrated rollers. The Malossi variator rollers can be used for both original and Malossi Multivar variators. Malossi supplies a complete line of variator rollers so that the right set of rollers can be found for every setup. In general, the following applies: the use of lighter rollers increases and the use of heavier rollers reduces the rpm.
Malossi X K Belt, the top of the racing variator belts. The trapezoidal Malossi X K belts are made of highly wear-resistant materials and fitted with a Kevlar® layer. This provides a very high thermal and wear resistance. The Malossi X K belt line is a premium part of the MALOSSI HYPER RACING product range and the result of decades of racing experience.
A Malossi Ventilvar half pulley completes the Malossi Multivar variator. The gear range is extended due to its adjusted angle, allowing the Multivar and variator run even better. The Malossi Ventilar half pulley has a greater cooling capacity than an original half pulley due to the improved cooling fins.
You can complete your Malossi setup with a Malossi HTQ primary or secondary transmission gear set. This converts the power supplied by the motor into speed. Produced with the utmost precision from specially hardened steel, with straight teeth and recalculated gear ratio. Due to the straight teeth, there is no axial pressure, so that the duty on the bearings is minimal.
