Fork Oil ENI Fork 5W 1L
Article information
APPLICATIONS:
Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.
The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.
It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
ADVANTAGES:
• Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.
• This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.
• The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.
• Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (fork seals).
Specifications
Part | : | Fork Oil |
Fits
Fork Oil ENI Fork 5W 1L fits the following vehicles:Documentation
Eni_Fork_Oil_5W_1425_4.0_...
Eni_Fork_Oil_5W_1425_4.0_...
Eni_Fork_Oil_5W_1425_NL_4...
Eni_Fork_Oil_5W_1425_4.0_...
Eni_Fork_Oil_5W_1425_4.0_...
Eni_Fork_Oil_5W_1425_4.0_...
Return of packaging material
We are legally obliged to take back the following packaging materials from end consumers and in particular from private households free of charge:
- Transport packaging (packaging which facilitates the handling and transport of goods in such a way to avoid their direct contact and damage during transport, and which is not typically intended for transfer to the final consumer - such as pallets, foils, cardboard boxes for groupage etc.)
- Sales and secondary packaging which, after use, does not typically result in waste from private end-users (especially bulk packaging)
- sales and secondary packaging for which a systematic disposal is not possible due to pollutant and/or health risks during recycling; and
- Sales packaging of hazardous products (plant protection products, oils, liquid fuels and other oil-borne products and mixtures of diphenylmethane-4-4,-diisocyanate)
We will also take back packaging material collected during delivery of the products free of charge.
Because this packaging material cannot be involved in a dual disposal system, we ensure the return of the material to an orderly recycling cycle by taking it back.
Final consumers may hand over the packaging material resulting from the delivery to the delivering company at the actual place of delivery.